Avago-technologies SAS 9207-4i4e Host Bus Adapter Instrukcja Użytkownika Pobierz pdf (Strona 13)

LSI Corporation

- 13 -

SAS-2 Integrated RAID Configuration Utility (SAS2IRCU) User Guide

November 2012

Commands

3.10.1 Command Line

sas2ircu <controller_#> activate <volumeId>

3.10.2 Parameters

 <controller_#> – The index of the controller with the volume that requires activation.

 <volumeId> – The volume ID of an Integrated RAID volume currently in the Inactive state.

3.10.3 Program Return Value

0x00 SUCCESS: Command completed successfully.

0x01 FAILURE: Bad command-line arguments or operational failure.

0x02 ADAPTER_NOT_FOUND: Cannot find specified adapter.

3.11 LOCATE

The LOCATE command locates a specific drive in a volume by turning on its location indicator and flashing its LED. The

command works only for drives installed in a disk enclosure. It does not work for drives attached directly to the

enclosure.

3.11.1 Command Line

sas2ircu <controller_#> locate <Enclosure:Bay> <action>

3.11.2 Parameters

 <controller_#> – The index of the controller with the drives that you need to locate.

 <Enclosure:Bay> – The enclosure and bay number of the drive.

 <action> – The possible actions are as follows:

— ON – Turn on the location indicator of the drive.

— OFF – Turn off the location indicator of the drive.

3.11.3 Program Return Value

0x00 SUCCESS: Command completed successfully.

0x01 FAILURE: Bad command-line arguments or operational failure.

0x02 ADAPTER_NOT_FOUND: Cannot find specified adapter.

3.12 LOGIR

The LOGIR command uploads or clears the Integrated RAID log information.

3.12.1 Command Line

sas2ircu <controller_#> logir <action> [filename] [noprompt]

3.12.2 Parameters

 <controller_#> – The index of the controller with the logs that you need to upload or clear.

 <action> – The possible actions are as follows:

— UPLOAD – Upload the controller logs to a file.

— CLEAR – Clear the controller logs.

 [filename] – This optional parameter specifies the name of the file to which the logs must be uploaded. The

default filename is LOGIR.LOG.

 noprompt – This optional parameter prevents warnings and prompts from appearing while the command is

running.

1 2 ... 8 9 10 11 12 13 14 15 16

Komentarze do niniejszej Instrukcji

Brak uwag

Avago-technologies SAS 9207-4i4e Host Bus Adapter Instrukcja Użytkownika Strona 13

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Avago-technologies SAS 9207-4i4e Host Bus Adapter